Home / Ceramic toner / Fluxed red glass toner set (600° to 630°C)

Fluxed red glass toner set (600° to 630°C)

Full-colour fluxed set with red, matched to the expansion of glass.

Fluxed red glass toner set (600° to 630°C)
GlassFloat and borosilicate
4 coloursC, red, Y, K
550 to 700 °CFiring range

The INEQS Red Glass Toner Set delivers vibrant red colours and excellent durability for professional glass decoration.

Advantages

  • Strong red colour performance
  • Fring from 600° to 630°C
  • Excellent adhesion on glass
  • Brilliant fired colours
  • UV and weather resistant
  • Reliable firing behaviour

Applications

  • Decorative Glass
  • Memorial Glass
  • Glass Awards
  • Signage
  • Architectural Glass

Designed for professional glass decorators requiring vibrant colours and dependable production results.


Why glass needs its own toner

Glass has no glaze to melt into, and it expands and contracts differently from porcelain or tile. Toner formulated for a glaze is the wrong tool for it. INEQS glass toner carries its own flux, matched to the expansion of float and borosilicate glass, so the colour fuses into the glass surface at a temperature the glass can take.

Full colour with a true red

This set prints cyan, red, yellow and black. Replacing magenta with a ceramic red gives saturated reds, oranges and warm tones on glass, which matters for logos, awards, warning signs and portraits on memorial glass. For black text, scales and markings only, the black and white glass toner is the simpler choice.

How glass decals are printed and fired

Print the design on INEQS decal paper, coat it with lacquer, soak the decal and slide it onto clean glass, then squeegee out all water and air. Dry the piece, then fire in a programmable kiln within the set’s firing range, ventilating while the lacquer burns out. The pigment fuses into the glass surface and becomes UV and weather resistant, which is why this set suits signage and architectural glass outdoors as well as awards and decorative pieces.

Decal or direct print on glass?

Large flat panels for facades and partitions are usually printed with ceramic inkjet before tempering. For glass objects, curved pieces, bottles, awards and short runs, the decal route with glass printing toner is more flexible: any shape, from one piece, with no minimum run. Read more on digital ceramic printing on glass, or send a file and a piece of your glass for a fired sample.

How to print on glass permanently

There are two ways to put a colour image on glass. UV printing lays an organic ink on the glass surface and cures it with light. It usually needs a primer or adhesion promoter, and because it sits on top of the glass it can scratch and fade outdoors. Ceramic glass printing fires the image into the glass instead: the toner carries inorganic pigment and glass frit, and in the kiln the frit melts and the pigment becomes part of the glass surface. The print is then as scratch resistant and weatherproof as the glass itself.

That is the route for glass printing that has to last: signage and architectural glass outdoors, awards, memorial glass and glass bottles. For white text and marks, the black and white glass toner set includes a glass white. Unlike screen printing, digital printing needs no screens, films or setup costs, so single pieces and short runs of custom glass are practical.

Technical data

CompatibilityAll INEQS printers; selected Ricoh, Canon and Xerox engines after INEQS conversion
PaperINEQS decal paper, A4 to A0 and rolls; keep a 5 mm margin around the decal
KilnVentilate during heating up to about 420 °C so the covercoat burns out cleanly
Printer room20 to 25 °C, 40 to 60% relative humidity; avoid sudden changes
Shelf lifeConfirm with INEQS for your set

Questions people ask

Which coating do I use with this set?

Fluxed sets can take lacquer only (no visible edges, less shine) or fluxed coating (shiny, possible edge). Unfluxed sets always need a fluxed coating.

How do I avoid the sticker effect?

Cover the whole decoration area with the fluxed material, or align the decal with an existing edge of the ware.

Can I get a test print?

Yes. Send a file and tell us the substrate; we print, fire and ship a sample.

Printers for this toner