Home / Ceramic toner / Fluxed red toner set RR85

Fluxed red toner set RR85

Four-colour fluxed set with ceramic red for glass, enamel and low-fire onglaze work.

Fluxed red toner set RR85
FluxedBrings its own glass
805 to 830 °CFiring range
4 coloursC, ceramic red, Y, K

The RR85 Fluxed Red Toner Set is designed for applications where strong reds are required together with a border-free finish after firing.

Because the toner contains flux, decals can often be coated with lacquer only, helping to eliminate visible decal edges and reducing the so-called sticker effect.

The RR85 is especially suitable for porcelain and tableware manufacturers looking for vibrant red decorations and a premium finished appearance.

Advantages

  • Strong red colour performance
  • Excellent green reproduction
  • No visible decal borders when used with lacquer-only coating
  • Smooth, integrated appearance after firing
  • Vibrant fired colours
  • Ideal for porcelain and tableware decoration

Considerations

  • Maximum firing temperature approximately 820 °C
  • Red and yellow pigments require controlled firing conditions
  • Limited pink, purple and violet colour range
  • May produce a matt or semi-matt finish on some hard-glaze porcelains

Typical Applications

  • Tableware Decoration
  • Porcelain Decoration
  • Promotional Products
  • Ceramic Gifts
  • Decorative Ceramics
Request a quote

Technical data

CompatibilityAll INEQS printers; selected Ricoh, Canon and Xerox engines after INEQS conversion
PaperINEQS decal paper, A4 to A0 and rolls; keep a 5 mm margin around the decal
KilnVentilate during heating up to about 420 °C so the covercoat burns out cleanly
Printer room20 to 25 °C, 40 to 60% relative humidity; avoid sudden changes
Shelf lifeConfirm with INEQS for your set

Questions people ask

Which coating do I use with this set?

Fluxed sets can take lacquer only (no visible edges, less shine) or fluxed coating (shiny, possible edge). Unfluxed sets always need a fluxed coating.

How do I avoid the sticker effect?

Cover the whole decoration area with the fluxed material, or align the decal with an existing edge of the ware.

Can I get a test print?

Yes. Send a file and tell us the substrate; we print, fire and ship a sample.

Printers for this toner

CeramPrint CP-500 (A4)Entry-Level Ceramic Printer for Digital Ceramic Decal PrintingRicoh SP C440 (A4)Compact Professional Ceramic PrinterRicoh IM C2010High-Quality Entry-Level A3 Ceramic Printer